Kia Addressed a Safety Concern in the 2024 Carnival but May Not Have Improved Its Score

Kia has attempted to make amends for a safety issue that was revealed by the Insurance Institute of Highway Safety’s (IIHS) testing regimen, one that has particular importance given the minivan’s status as a family and passenger hauler. Though Kia has worked to address the issue, some notable concerns remain.

The 2024 Kia Carnival had a safety concern that the company addressed

IIHS testing of the 2024 Kia Carnival, which applies to model years 2022-24, revealed the second-row captain’s chair became detached from the minivan’s floor during side impact tests.

This caused the seat and the dummy passenger in the second row to tip “sideways and backward” and come to a rest on the seat and passenger’s side in the rear cargo area. The IIHS notes the seat breaking away from the floor did not seem to worsen injury measurements for these passengers, but the organization states “such separations should not occur.”

“Such a detachment would create an obvious danger to a person sitting in that seat in a real crash,” the IIHS said, adding the loose seat could also endanger other passengers.

The organization said it notified Kia of the issue, and the automaker strengthened the rails attaching the rear seats to the floor in models built after August 2023. Kia has created a campaign to update these rails in Carnival models manufactured before that time, free of charge.

Despite the issue being addressed, the Carnival’s score in such testing continues to be “poor.”

The update didn’t change the score from the IIHS

The IIHS tested the 2024 Carnival following Kia strengthening the seat/floor attachment mechanism, but it did not ultimately improve the minivan’s overall score in the IIHS’ side crash test, which was updated with more stringent guidelines in 2021.

The organization said the rear seat did not break away from the floor following Kia’s improvements, but the Carnival was still rated poor—the lowest possible rating from the IIHS—in side crash testing. The IIHS said the Carnival’s safety cage “did not hold up well” and there remained “a high risk of injuries to the driver’s pelvis and rear passenger’s chest.”

Is the 2024 Kia Carnival safe?

Passenger safety is vital across all car body styles, but it takes on added significance in the minivan segment where it’s reasonable to assume most buyers will be hauling their families or plenty of passengers. Though the Carnival’s recent seat detachment is certainly concerning, the minivan can still be considered generally “safe,” though perhaps not as much as some of its rivals.

The Carnival earned the highest possible rating overall in four of the six “crashworthiness” tests the IIHS conducts, with a “marginal” score—the second lowest—in one the institute’s updated moderate overlap front test and the unchanged “poor” rating for the updated side test.

To note, the Carnival earned the top score in the IIHS’ previous side crash test, which includes an impact from a lighter car at 31 mph instead of the 37 mph of the new test.

The Carnival’s headlights scores were rated as both “good” and “poor”, depending on trim. Its front pedestrian crash prevention system earned the highest score in day conditions, though its nighttime performance was rated as “basic.”

The IIHS ranked the ease of using the Carnival’s LATCH restraint system and seat belt reminders as “acceptable.”

The Carnival’s overall ratings are closely aligned with that of the 2023 Chrysler Pacifica. The 2023 Toyota Sienna and 2023 Honda Odyssey each earned Top Safety Pick+ awards, the highest designation the organization bestows based on overall safety ratings.

The post Kia Addressed a Safety Concern in the 2024 Carnival but May Not Have Improved Its Score appeared first on MotorBiscuit.

A Thanksgiving Roadkill Guide: The 3 States With the Highest Turkey Populations

Each Thanksgiving, millions of car drivers set out in the hopes their pumpkin pies in the trunk won’t transform into pumpkin soup on the journey and that their pot of mashed potatoes will stay in the pot and not spray a starchy layer of spuds onto the backseats. As we approach another Thanksgiving, some will turn to the roads to hunt their Thanksgiving table’s edible centerpiece, while others hope to avoid hitting a turkey while driving. Here’s a look at the three states in the U.S. with the highest wild turkey populations, according to A-Z Animals.

1. Missouri

A-Z Animals notes there are approximately 6-7 million wild turkeys in the U.S., which can be found in almost every state. Several species of turkeys are native to the U.S. and can mostly be found in “cleared areas” adjacent to or within forests. The website also notes turkeys were once abundant in North America, but deforestation and hunting endangered the birds by the 1970s. In 1972, the National Wild Turkey Federation was formed to protect the remaining population in the U.S. and preserve their habitats. Additionally, the organization supports control measures now that the birds’ populations have rebounded.

In the U.S., the Show Me State ranks as the third most populous state for wild turkeys, estimated at around 350,000. The midwest, particularly areas closer to the mid-South and southeast, is a proverbial hotspot for wild turkeys compared to other parts of the country, including the northeast, Pacific northwest, and southwest. Missouri’s population is estimated to be slightly higher than its neighbors. For instance, populations in Kansas are estimated to be 300,000, while in Kentucky, the figure is between 250,000-300,000.

2. Wisconsin

Continuing the Midwest theme, Wisconsin may be known as the Badger State, but it’s also where hunters (and drivers) can expect to see wild turkeys in abundance. Wisconsin is the No. 2 state for wild turkeys in the U.S., with an estimated population of about 350,000 wild birds roaming the area.

Neighbors, Michigan and Minnesota, have slightly lower populations at 200,000 and 225,000 birds, respectively.

3. Texas

As the adage goes, everything is bigger in Texas, and apparently, that also translates to wild turkey populations. There are about 500,000 wild turkeys in Texas, according to estimates. It may not be the biggest state in the U.S. for land mass, but it’s certainly the largest state with wild turkeys, as they aren’t found in Alaska, according to AZ Animals.

To note, wild turkey populations in Florida and Ohio could be higher, with the website stating that estimated populations in these states could surpass Texas at 700,000 birds. However, the figures also guess these states could have numbers of as little as 100,000 to 150,000.

Which states have the least amount of turkeys?

Drivers who hit the road in several states this Thanksgiving are unlikely to encounter turkey crossings or roadkill along the way.

AZ Animals notes Alaska’s Department of Fish and Game has yet to confirm a wild turkey sighting in the state. The other non-contiguous U.S. state, Hawaii, also lacks native wild turkeys, but some were introduced to Oahu. However, the population of wild turkeys on the Hawaiian islands is unknown.

Delaware, Nevada, and Rhode Island drivers are also unlikely to encounter a wild turkey. Nevada’s population of such birds is estimated to be just 1,200, while populations in Rhode Island (4,000-5,000) and Delaware (6,000) are notably higher but are still relatively limited.

Top 10 Busiest Highways in the U.S.: Is Your State on the List?

An Overview of America’s Most Congested Highways

The United States boasts an extensive network of highways vital for connecting cities and facilitating the movement of people and goods. However, some of these major routes are notorious for their severe traffic congestion. According to the latest data from the American Transportation Research Institute (ATRI), these ten highways are the busiest in America, reflecting the critical yet stressful nature of our transportation system.

Key Congestion Points Across the Nation

  1. Fort Lee: I-95 at SR 4
    The interchange at Fort Lee, New Jersey, where Interstate 95 meets State Route 4, is a major choke point, crucial for traffic moving in and out of New York City.
  2. Chicago: I-294 at I-290/I-88
    Chicago’s complex highway network, especially the interchange between I-294, I-290, and I-88, faces significant congestion due to heavy truck and commuter traffic.
  3. Houston: I-45 at I-69/US 59
    In Houston, Texas, the high traffic volume at the junction of I-45 and I-69/US 59, particularly from commercial trucks, highlights the city’s transportation challenges.
  4. Atlanta: I-285 at I-85 (North)
    The interchange between I-285 and I-85 (North) in Atlanta, Georgia, serves as a key junction for regional interstate travel, contributing to its heavy traffic load.
  5. Atlanta: I-20 at I-285 (West)
    Another critical point in Atlanta’s transportation network, the interchange between I-20 and I-285 (West), experiences significant congestion due to its strategic location.
  6. Chicago: I-290 at I-90/I-94
    Chicago’s role as a transportation hub is evident with its multiple entries on this list, including the congested interchange of I-290 and I-90/I-94.
  7. Los Angeles: SR 60 at SR 57
    Los Angeles faces its own traffic issues, with the junction of State Road 60 and State Road 57 being one of the city’s busiest and most problematic.
  8. Los Angeles: I-710 at I-105
    The interchange of I-710 and I-105 in Southern California frequently encounters severe traffic bottlenecks due to its vital role in the region’s freeway system.
  9. Nashville: I-24/I-40 at I-440 (East)
    Nashville, Tennessee, sees increasing traffic at the interchange of I-24/I-40 and I-440 (East), reflecting the city’s growth and rising transportation demands.
  10. San Bernardino: I-10 at I-15
    The intersection of I-10 and I-15 in San Bernardino, California, is heavily trafficked due to the movement of goods and commuters in the Inland Empire region.

Insights and Considerations

The U.S. interstate system, created in 1956, has been instrumental in economic development by providing essential transportation routes. Despite the high traffic volumes on these roads, there are also scenic and less congested routes offering a different view of the country. As traffic patterns and congestion levels fluctuate, understanding these dynamics helps improve the efficiency and safety of our transportation infrastructure.

What Blue Smoke from Your Car’s Exhaust Might Indicate

The Function of the Exhaust System

Your vehicle’s exhaust system is essential for managing and expelling combustion byproducts. It includes the exhaust manifold, catalytic converter, muffler, and tailpipes, all working together to handle exhaust gases. The catalytic converter is crucial, using metals like palladium and platinum to transform harmful gases into less toxic emissions, greatly reducing environmental impact.

Identifying Unusual Smoke

Spotting smoke from your car’s exhaust often signals engine issues. Typically, you might see a faint white smoke during startup or on cold mornings, which is just condensation evaporating. However, if you notice blue or gray smoke, it likely means that oil is burning in the engine, indicating potential issues with components such as valve seals or piston rings.

Dealing with Exhaust Smoke Problems

Blue smoke generally points to oil consumption in the engine, commonly due to worn-out piston rings or valve seals. Black smoke can mean excessive fuel is being used, possibly from a dirty air filter or malfunctioning fuel injectors. The most alarming is white smoke, which could signify a blown head gasket allowing coolant into the engine, a costly repair if not addressed quickly. Timely diagnosis and repair can prevent more extensive damage and keep your vehicle running smoothly.

Understanding Ignition Interlock Devices: The Essential Guide to Car Breathalyzers

Introduction to Ignition Interlock Devices

Ignition interlock devices (IIDs), commonly known as car breathalyzers, are crucial tools in preventing drunk driving. Installed in vehicles of individuals convicted of DUI offenses, these devices ensure the car won’t start until the driver successfully passes a breath alcohol test. This preventive measure has become a cornerstone in efforts to enhance road safety by ensuring that only sober drivers can operate their vehicles.

Functionality and Impact of IIDs

An IID requires the driver to perform a breathalyzer test before the engine will start. If the breath alcohol concentration (BrAC) is above the set limit, typically lower than the legal intoxication level, the vehicle remains immobilized. These devices also require periodic retests during drives to maintain continuous proof of sobriety. The implementation of IIDs has shown significant effectiveness in reducing repeat offenses among convicted drunk drivers, thereby increasing overall traffic safety.

Broader Applications and Future Technologies

Besides mandatory installations following DUI convictions, some individuals choose to install IIDs voluntarily to safeguard against potential impaired driving. Looking forward, there is movement towards integrating breathalyzer systems more extensively across new vehicle fleets. Emerging technologies might include touch-based sensors integrated into vehicle controls like steering wheels or seat belts, which could detect alcohol levels more seamlessly and prevent impaired driving proactively.

These advancements in vehicle safety technology represent a significant shift towards more responsible driving cultures and the potential for greatly reduced drunk driving incidents nationwide.

How Rumble Strips Improve Road Safety: Understanding Their Function and Benefits

Rumble strips are crucial for enhancing road safety by alerting drivers to potential hazards through auditory and tactile signals. These strips, which you may have noticed during your drives, come in various types and designs to address different safety needs. Let’s delve into how these seemingly simple features contribute significantly to safer roads.

What Are Rumble Strips and Their Importance?

According to the Federal Highway Administration, rumble strips are categorized into three main types: centerline, shoulder, and transverse. The International Road Assessment Programme (iRAP) highlights that these strips help prevent accidents by alerting inattentive or impaired drivers through vibrations and noise when they drift from their lane or approach critical areas. When tires roll over these strips, they create noticeable vibrations and a loud sound, which helps keep drivers alert and focused.

Different Types of Rumble Strips

  • Centerline Rumble Strips: Positioned between opposing traffic lanes, these strips alert drivers who might unintentionally drift into oncoming traffic.
  • Shoulder Rumble Strips: Found along the edge of the road, these strips help prevent vehicles from veering off the roadway, particularly useful for drowsy or distracted drivers.
  • Transverse Rumble Strips: Placed across the direction of travel, these strips signal drivers to upcoming changes like intersections or work zones, ensuring they slow down or prepare for sudden adjustments.

Rumble Strips vs. Speed Bumps

Rumble strips and speed bumps serve different purposes. Speed bumps are designed to slow down traffic by forcing drivers to reduce speed as they pass over them, while rumble strips are intended to alert drivers without necessarily causing a speed reduction. This distinction allows rumble strips to effectively catch drivers’ attention at higher speeds.

Pros and Cons of Rumble Strips

Pros:

  • Enhance driver awareness and reduce accidents.
  • Cost-effective compared to other safety measures.
  • Alert drivers to upcoming road changes.

Cons:

  • Can create noise that affects nearby residents.
  • May pose a hazard to cyclists if bike paths are not provided.

Varieties of Shoulder Rumble Strips

There are four main types:

  • Rolled Rumble Strips: Rounded grooves pressed into asphalt, providing a gentle alert.
  • Formed Rumble Strips: Pressed into concrete during construction, similar to rolled types but for concrete roads.
  • Milled Rumble Strips: Cut into existing road surfaces, creating deeper and more pronounced grooves.
  • Raised Rumble Strips: Elevated markers used in areas with milder climates, often visible as rounded or rectangular shapes.

Rumble strips are known by various names, such as “drunk bumps,” “sleeper strips,” and “alert strips,” depending on the region. For more information on how your state uses rumble strips, contact your local Department of Transportation. Understanding these features helps appreciate their role in keeping roads safer for everyone.

The Nissan Model with the Lowest Maintenance Costs May Surprise You

Understanding Nissan’s Maintenance Cost Performance

When choosing a vehicle, understanding long-term maintenance costs is crucial to avoid unexpected expenses. Although the Nissan Versa and Versa Note are known for their low purchase prices, they don’t hold the top spot for the lowest annual maintenance costs. According to RepairPal, the Nissan Rogue Select, an SUV from 2014-2015, actually leads with the lowest maintenance expenses among Nissan’s lineup.

Why the Rogue Select Outperforms the Versa

Contrary to the expectation that lower-cost models will have the cheapest upkeep, the Rogue Select stands out with its average annual maintenance cost of $436. This figure is notably lower compared to the Versa sedan’s $456 and the Versa Note’s $445. Despite being an older model, the Rogue Select’s reliability and minimal repair needs contribute to its impressive cost-effectiveness, making it a smart choice for budget-conscious drivers.

Top Bumper Cars for 2023: A Comprehensive Guide

Find the Perfect Bumper Car for Fun and Safety

Searching for the ideal bumper car to enjoy with family and friends? Our thorough research and hands-on testing reveal the top choices available this year. Key factors to consider include safety, durability, maneuverability, and user feedback. While these cars are designed for fun, proper maintenance and thoughtful operation are crucial to ensure a safe experience. Despite any space constraints you might face, bumper cars continue to be a fantastic way to bring joy to gatherings. Our expert recommendations will guide you in selecting the best option to suit your needs and preferences.

Kidzone 6V Electric Ride-On Bumper Car

The Kidzone 6V Electric Ride-On Bumper Car is designed for children aged 1.5 to 5 years. Featuring customizable DIY stickers and LED lights, it offers an engaging driving experience. Parents can easily oversee playtime using the included remote control, and the car’s 360-degree spin capability enhances the fun while ensuring safety with ASTM certification.

BROAGE 6V Electric Bumper Car with Remote Control

The BROAGE 6V Electric Bumper Car is a great pick for young racers. With its 360-degree spin and custom number decals, this ASTM-certified vehicle combines fun with safety. The sleek design and manageable size make it ideal for children, and the remote control adds an extra layer of parental supervision.

Sakar Sonic the Hedgehog Bumper Car

The Sakar Sonic the Hedgehog Bumper Car features a 12V motor and is perfect for fans of the popular character. It includes a remote control and 360-degree turning, making it a versatile choice for both indoor and outdoor play. The LED lights add a playful touch, ensuring hours of entertainment for toddlers.

Kidzone 12V Ride-On Bumper Car with Remote

For a thrilling ride, the Kidzone 12V Ride-On Bumper Car offers two driving modes and LED lights. Suitable for children aged 1.5 to 6 years, it includes a remote control for added safety. The car’s customization options and 360-degree spin feature make it an exciting choice for young adventurers.

Bumper Buddy Electric Bumper Car

The Bumper Buddy Electric Bumper Car combines a 12V motor with easy maneuverability for kids aged 1 to 5. This toy is designed for both indoor and outdoor fun, with a durable build and pink color that adds to its appeal. The included remote control and safe design ensure an enjoyable experience for young drivers.

ELEMARA Bumper Car for Toddlers

The ELEMARA Bumper Car stands out with its safety features, including a safety belt and two driving modes. Designed for toddlers, it offers smooth operation and LED lights for added fun. The car’s customizable DIY stickers allow kids to personalize their ride, making it a top choice for playful and secure driving.

Click N’ Play Set of 2 Remote Control Bumper Cars

The Click N’ Play Set includes two remote control bumper cars, perfect for competitive play. With durable construction and intuitive remote controls, these cars are great for children aged 6 and up. The set promises endless fun with friends and family, making it a lively addition to any playtime.

SereneLife Electric Bumper Car for Kids

The SereneLife Electric Bumper Car offers a 12V rechargeable battery and two driving modes for toddlers. The remote control allows parents to guide their child’s driving, while the LED lights and 360-degree spin enhance the excitement. Its safety features and vibrant design ensure a fun and secure ride for young ones.

OTTARO 6V Ride-On Bumper Car

The OTTARO 6V Ride-On Bumper Car provides a dynamic driving experience with its electric motor and 360-degree spinning. It includes a remote control for parental oversight and features fun music to entertain kids. The car’s design supports both indoor and outdoor play, offering a robust and enjoyable ride for children.